Cross-country flights are a mandatory PPL and CPL navigation exercise. Learn the planning steps, from route selection to weather briefing, under GACA rules.
Cross-Country Flight Planning: PPL & CPL Training Guide The first time you hear "cross-country" mentioned among aviation enthusiasts, it might bring to mind gliding competitions or the "air crossing" events held across the Gulf, with dozens of amateur pilots taking part. That's a real meaning of the term — but it's not what we're talking about here.
In pilot training, a cross-country flight has a very specific technical meaning: a long navigation flight between two or more airports, requiring full planning before takeoff and continuous decision-making in the air. It isn't just another training exercise — it's one of the milestones that separates a trainee who follows instructions from a pilot who can plan and decide on their own.
What Is a Cross-Country Flight in Pilot Training? Simply put, it's a navigation flight from a departure airport to one or more airports over a meaningful distance — usually flown with an instructor in the early stages, then solo later in training.
The key difference from a regular training flight is that you plan the route yourself from scratch: choosing airports, calculating fuel and time, and making navigational decisions while away from your home base. That's exactly what makes it a turning point. Up to this point, your instructor or a pre-set circuit usually carried the details.
On a cross-country flight, that responsibility shifts to you. Why It's a Core Requirement for Your PPL or CPL The General Authority of Civil Aviation (GACA) follows the standards set by the International Civil Aviation Organization (ICAO) when approving training syllabi, which includes a set number of cross-country hours and exercises as a core part of both the PPL and CPL curriculum.
The exact minimums are set by GACA and your training academy, and they differ between the two licenses in terms of complexity and distance required.
The important thing to understand isn't the number itself, but why the requirement exists at all: every professional pilot will eventually need to plan and manage real flights independently, and the cross-country flight is your first real rehearsal for that responsibility.
The Planning Stages Before the Flight 1 Choosing the Route and Alternate Airports It's not just about picking a destination — you need to identify at least one alternate airport in case weather conditions or an operational issue changes during the flight.
2 Reading VFR Charts Identifying ground landmarks, terrain elevations, and airspace boundaries along your route, before you rely on any electronic aid. 3 Calculating Fuel, Time, and Distance Estimating fuel burn for each leg of the flight, with an adequate safety margin, and calculating expected time at each point along the route.
4 Setting Checkpoints and a Point of No Return Clear checkpoints along the route to confirm you're on track, and a point where continuing becomes the safer option compared to turning back.
5 Getting a Weather Briefing In Saudi Arabia specifically, dust and sudden drops in visibility are factors you need to take more seriously than any imported syllabus built around entirely different weather conditions.
6 Checking NOTAMs and Airspace Restrictions Any temporary closure, navigational warning, or airspace restriction along your route needs to be reviewed well before takeoff — not discovered mid-flight. A Local Training Flight vs. a Cross-Country Flight A local training flight usually stays close to the same airport, with direct and continuous support from your instructor.
A cross-country flight is different in nature: a longer distance, independent decisions, and full responsibility for planning and execution. The difference isn't just technical difficulty — it's the level of trust and responsibility expected of you. Common Mistakes Trainees Make Misjudging fuel: relying on rough estimates instead of a precise calculation with a clear safety margin.
Skipping the alternate airport: planning for only one destination airport, with no backup plan ready. No…